1.1 Soft lithography
Microstructure나 nanostructure을 만들기 위한 printing, molding의 과정을 포함하는 technique으로, 일반적으로 printing, molding, transfer의 3단계 과정을 거친다.
1.1.1 Printing
Master를 만드는 과정이다. Photolithography, e-beam, micro-machining, photoresist 등 다양한 방법을 통해 원하는 모양을 가지는 master를 제작할
instrument composition
-Electric furnace
Temperature range:
25°C~1500°C
Heat speed :
Maximum 200°C/min
*Separate Electric furnace and other system like Electronic scale
-Because Electric furnace temperature is very high
so we need to protect other system.
instrument composition
-Electric furnace
Temperature range:
25°C~1500°C
Heat speed :
Maximum 200°C/min
*N
laminar flow hood를 사용한다.
◀ 음압 진공펌프를 이용한 여과멸균 장치
(2) 저온살균법(pasteurization)
우유의 저온살균법은 오염된 우유를 통해 질병을 전염시키는 Brucella sp, Coxiella burnetii, mycobacterium tuberculosis, Salmonella, Listeria 등과 같은 세균들을 살균하기 위한 멸균방법이다. 이러한 미생물들을 상대
Laminar Flow
Laminar flow is a fluid regime characterized by high momentum diffusion and low momentum convection.
Transition
Laminar → Turbulent
Turbulent Flow
Turbulence or turbulent flow is a fluid regime characterized by low momentum diffusion, high momentum convection, and rapid variation of pressure and velocity in space and time.
1. Turn on the water supply